Information for Manufacturer

Here is the approximate size of both the small cup and large cup
This is an older model of basically the same size communion (2) cups
We would like to FIRST start production on the 36oz cup
It would be so good to have a completely "seemless" stainless steel mold (IF possible)

Here the cup is up side down so you can see the seam and where there is an unnecessary sanitation issue.



Below is another style communion set (about the same size) but we like the fuller bottom (above) and either of the dripless lips (above or below versions).
The plate (shown below) is with the middle being flat for the one circular loaf (bread).
7" flat area for the loaf and 1.5" lightly curled up trim that will make it = 10" total round plate
[ Plate is same size for both cups ]
The Lid for the Cup also needs to be completely seamless IF possible.
All of these items are used every Sunday and need to be beautiful but also very functional (not just for viewing, but using, they are passed from hand to hand to all of the congregation)
The Polished Stainless Steel must be very high quality and have no metal taste..
Grape Juice will be placed in it and remain there for about 1.5 hours and then cleaned for the next Sunday Service. Please confirm that Stainless Steel with NOT pit or change the taste by the acid in the grape juice.

If we are pleased with the first order of the large communion sets (2 handles each), we will then order and stock both 28oz and 36oz cups (communion sets)...
28oz Small and 36oz Large communion sets (2 handles each)

Note:  Since silver continues to go up, we would be VERY interested in making all of these communion sets with good grade polished stainless steel.
The cup must be light enough for elderly people to hold and pass to the next person.
Very High Quality, Durrable, yet reasonably Light Weight.
HOWEVER, if a copper base with silver plating is a better deal, then we will consider those cups/lids/plates.

We are looking for a long-term business relationship with a good supplier.